|Type:||ESC 250D Quick Fast Connector||Insertion Loss:||Less Than 0.3 (max 0.4)|
|Paintcoat Color:||Blue Or Green||Return Loss:||≥40dB|
|Drop Cable:||DROP 3.0MM FLAT 2*3CABLE||Tensile Strength:||>50N|
|Mode:||Singlemode Or Multimode||Cable Type:||2.0mm 3.0mm Cable, 3X2mm Drop Cable|
|Package:||Individual Box Or According To Customer′s Request||Insertion Loss:||100% <0.3dB|
fiber cable connectors,
fiber fast connector
Fast connector are factory pre-polished field-installable connectors that completely eliminate the need
for hand polishing in the field.
The Field Assembly Connector series are already a popular solution for optical wiring inside buildings and floors
for LAN & CCTV applications and with the expansion of FTTH,
is already proving itself to be the connector of choice by incumbents, municipalities, utilities & alternative carriers.
Our Field Assembly Optical Connector series are now available in SC, LC, or FC variants, catering for 250um to 900um,
and 2.0mm, 3.0mm diameter single mode and Multimode fiber types, including Multi-mode 62.5/125um and Multi-mode
50/125um. The single-mode versions are available with SPC or APC ferrules.
Proven mechanical splice technology ensuring precision fiber alignment,
a factory pre-cleaved fiber stub and proprietary index matching gel combine to offer an immediate
low loss termination to either single-mode or multimode optical fiber.
Fast connectors are compatible with 250um and 900um optical fiber as well as 900um, 2mm, 3mm and drop cable cordage.
All primary fiber types are supported.
Each connector is color per industry standard requirments to aid in identification during and afger installation.
Incorporated in device is an innovation.
Translucent wedge enabling the use of a common VFI to provide a "pass/fail" signal once physical contact is achieved.
3.0 x 2.0 mm and 1.6*2.0mm
Bow-type Drop Cable
|Fiber Diameter||125μm ( 652 & 657 )|
|Operation Time||about 15s(exclude fiber presetting)|
|Insertion Loss||≤ 0.3dB(1310nm & 1550nm)|
|Return Loss||≤ -50dB for UPC, ≤ 55dB for APC|
|Reusable Times||>10 times|
|Tighten Strength of Naked Fiber||>5 N|
|Tensile Strength||>50 N|
|Temperature||-40 ~ +85 C|
|On-line Tensile Strength Test (20 N)||IL ≤ 0.3dB|
|Mechanical Durability(500 times)||IL ≤ 0.3dB|
Drop Test(4m concrete floor, once each direction,
three times total)
|IL ≤ 0|
Fiber Optic Fast Connector designed for FTTH is a new generation of fiber connector used in assembly.
It can provide Open flow and precast type of products, whose optical and mechanical specification
meets the standard optical fiber connector.
It is designed for high quality and high efficiency for installation.
The structure of crimping position is a unique design, and need not gluing, polishing neither any
(1). Insertion loss:≤0.35dB ,Return loss:≥60dB.
(2). Mechaincal Durability:1000matings
(3). Storage temperature:-40ºCto+85ºC
(4). Operation temperature:- 40 ~ + 85 ºC
(5). Tensile Strengh:>30N
(6). Number of repeated use:5 times above
(7). SC connector according to IEC 61754-4 .
(8). Suitable for cable outer diameter 0.9 mm, 2.0 mm and 3.0 mm, 2 * 3.0 mm.
we supply the FC type, LC type, SC type and ST type fast connectors for FTTH drop cable.
Contact Person: Hicorpwell