FTTH outdoor 1/2/4/8/12 cores G652D/G657A1/2 single mode GJXFHA bow-type drop cable for duct
The loose tubes are made of high modulus plastics (PBT) and filled with a water resistant filling gel.
Loose tubes are stranded around non-metallic central strength member (FRP).
The cable core wrapped with a water blocking tape, and then aramid yarns or glass yarns
are applied over the cable core. Polyethylene (PE) is extruded as outer sheath.
Feature
Performance
Product Parameters
|
Product name |
FTTH outdoor 1/2/4/8/12 cores G652D/G657A1/2 single mode GJXFHA bow-type drop cable for duct
|
|
Introduction |
The optical fiber unit is positioned in the center. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides. The, the cable is completed with a black or color LSZH (Low smoke, Zero halogen, Flame-retardant) sheath and armed with aluminum band. Finally the cable is completed with a PE sheath.
|
|
Characteristics |
1. Special Low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property. 2. Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber. 3. Novel flute design, easily strip and splice, simplify the installation and maintenance. 4. Low smoke,.zero halogen and flame retardant sheath; PE sheath protects cable from ultraviolet radiation. 5. Simplex structure, light weight and high practicability. 6. APL moisture barrier. |
|
Application |
1. Indoor riser level and plenum level cable distribution 2. Interconnect between instruments, communication equipments.
|
|
Standards |
Comply with standard YD/T 1258.2-2003,IECA-596,GR-409,IEC 60794-2-10/11,etc; and meet the requirements of UL approval for OFNR and OFNP.
|
