Product Description
SC APC Quick Assembly connector can provide quick and easy terminations of fibers in the field. It allows the installer to terminate
and make connection in minutes at equipment and fiber patch panels. This connector system with features of high installation
quality, high success rate and high reliability.
Disadvantages On V-Groove:
1,The poor butt joint's deformation is caused by V-groove forming process because the plastic rigidity is not good.
2, The thermal expansion and cold shrinkage change greatly if V-groove with Plastic materials.
Thus, the product can not work stably at -40~+85 ℃ environment.
3,After the long service of poor butt joint , both plastic and metal materials are prone to aging deformation or rust,
4,Groove easily deforms under force ,making docking point miss match ,inceasing.
The original, and Hicorpwell high quality fast connector with C-Groove (Ceramic Groove )
Advantages On C-Groove (Ceramic Groove ):
Ceramic material insure insert loss (IL) ranges less than 0.1db,when dealing it in high temperature ,low temperature,
or high low temperature cycle.By the illustration,we could see clearly the insertion loss ranges following the temp.
Most of Common Fiber Fast Connector is traditional technology with V-groove,
main materials are glass ,plastic,and metal.
Specifications
| Items | Test condition | Value |
| Optical performance | Insertion Loss(1310nm&1550nm) | <0.2dB(typical)/ 0.5dB(Max) |
| Return Loss(1310nm&1550nm) | UPC>40dB,APC>50dB | |
|
Environmental Performance (Max. Insertion Loss change) |
Temperature Cycle -20°C ~+70°C (96hours) | <0.2dB |
|
Mechanical Performance (Max. Insertion Loss change) |
Online tension 20N- 100N | <0.2dB |
| Impaction 3 axis/3times 4m high | <0.2dB | |
| Repeated operation times | 5 |
