Stainless Steel Tri Clamp Heavy Duty High Pressure Equipment Pipe Clamp
An embedded embrace hoop, it is the right and left halves join after embrace hoop involution, left and right half piece are in semicircle ring,
the hoop bending outward on both ends of the half circle, which formed an installation ears, whose character is:
the left piece at the end of the hoop as stated in the mounting ears open caulking groove, the corresponding, coupled with the right piece of hoop set
corresponding to the installed ear pin, right hoop end pin embedded left patches on the installed ear hoop end installation embedded groove on the ear.
The straight splint is used for tangent tower, it provides hanging point to ADSS optical optical cable.
The hold hoop fix the strain clamp and suspension clamp on the pole, and provide hanging point to ADSS optical cable erection.
Hold hoop is to use a material or so-called waling another material artifacts.
It belongs to the fasteners. Embrace hoop device by coupling board, wing, Rachel reinforcing plate, bolt and inner liner.
Hoop has a good variety of, embrace hoop cable, telephone pole embrace hoop, anchor hoop, messenger wire hoop,
stainless steel hoop are relatively common.
The fastening clamp could fix or connect different clamps on the steel tower or pole. It has pole type and tower type
according to the lines characteristics.
The tower type is metal splint, it fixes different clamps on the iron town without damage of iron tower strength. Pole type is hold hoop.
Tension splint is used for corner tower or terminal tower, it provides hangings point to ADSS optical cable erection.
||Sanitary Stainless Steel Tri Clamp Heavy Duty High Pressure Equipment Pipe Clamp
||According to customers
||1/2" to 12"