|Rm 604 Bldg 9th Yinxingyuan South Rd Nanshan District 518054 Shenzhen Chinafirstname.lastname@example.org|
Payment & Shipping Terms:
|Name:||Low Rpm PMG Generators||Rated Power:||5KW Low Rpm Generators|
|Shaft Material:||Carbon Steel||Rated Voltage:||AC 400V|
|Rated Current:||7.21A||PMG Collocation::||Y Connection，Three Phase Three Wires， Alterna|
|Speed Range:||0-450RPM||Rotor:||Rare Earth Permanent Magnet|
|Power Type:||Off-grid Or On-Grid||Weight:||100KG|
grid tied solar power system,
roof mounted wind generator
Permanent Magnet Generator 10kw200rpm400V Generator PMG for HAWT
Our Permanent Magnet Generator products adopt optimum pole slot configuration, and have shorten magnet circuit and the pitch of stator winding which make the structure design of the products more reasonable, and reduces material consume by 15% compared with like products.
Thus the products are small and light.
The start torque is lower by 40% than national standard, while the whole efficiency of the generators have boosted by 10%.
In order to improve the wind utilization rate, We have developed a new kind of PMG with low frequency and high efficiency recently,
whose speed of voltage buildup is lower, so it has a better performance in gentle breeze.
China , is the home of rare earth,where accounted for 80% the world's rare earth reserves.The National Rare Earth Application and Research Agency and the National Rare Earth High-Tech development zone are also in this area who have provided us with abundant permanent material and advanced technology support for the products R&D.
Relying on the superiority of Technology,Policy and local rare earth resources,the company has increased the yearly production of rare earth permanent magnet generator and rare earth permanent magnet synchronous motor to 100MW, All of those laid a solid foundation for the sustainable development of the enterprise.
We apply high quality 40SH,42SH,40UH rare-earth NdFeB(Neodymium Iron Boron) Magnet to our generator. The fastness of magnet steel of rotor adopt inlaid type process, strong adhesives splicing ,furthermore epoxy resin encapsulating technology which increase stability and corrosion resistance of magnet.
The stator and rotor of generator apply high grade cold rolling silicon sheet, with high intensity and characteristic of uneasily deformed; the stator windings are wound with 180 grade combing paintcoat series enamel-cover round copper wire, especially it is impregnated by the techniques of combing process of vacuum constant temperature and constant heat, it has elevated insulation grade .
We choose professional completely-enclosed NSK,NTN,SKF,C&U bearings and nickle plated 40Cr steel shaft with quenching and tempering treatment,the outer frame is Zinc plated with anti-corrosion treatment.We believe high quality material and advanced craft is the firm guarantee of the high quality products.
No. Parameter Units Data
1 Rated output power KW 10
2 Rated speed RPM 200
3 Rated output voltage VAC 400
4 Rated current A 15
7 Efficiency at rated speed ＞92.5%
8 Winding type Y
9 Insulation resistance 20 MΩ
10 Rated torque Nm 520
11 Start torque Nm ＜10
Temperature rise °C 90
12 Max.working temperature °C 130
13 Generator diameter mm See the drawing
14 Shaft diameter mm See the drawing
15 Housing material Casting Iron
16 Shaft material Steel
17 Bearing SKF
18 Weight Kg 240
Contact Person: Hicorpwell