HCW-325 Fiber Testing Tools Visual Fault Detector 50MW Black Leather Sheath
HCW-325  Fiber Testing Tools Visual Fault Detector 50MW Black Leather Sheath
Features Gallery Product Description Request A Quote
Basic Infomation
Place of Origin: China
Certification: IEC 60794-2-10/11
Model Number: HCW-325 Fiber Optic Visual Fault Detector
Payment & Shipping Terms
Packaging Details: HCW-325 Packages :25 x 195mm,Weight 165g (without battery)Dimension25 x 195mm
Payment Terms: Western Union, L/C, T/T
Supply Ability: 1000pcs Per Week
Compatibility: G652D And G657A1
Packages Size: 25 X 195mm 165g (without Battery)
Package: Black Leather Sheath And White Box
Battery Type: LR6 AA Alkaline Battery
Optical ConnectorFull Name: 2.5mm Universal Connector
1.25mm Connectors, FC (Male)-LC. (Female) Convertor Can Be Provided On Request: FC(Male)-LC. (Female) Convertor Can Be Provided On Request
Product Description



HCW-325 Fiber Testing Tools Visual Fault Detector 10MW 20MW 30MW Black Leather Sheath


Method of Using :


1. Screw the end cap from the pen, the battery will be prepared into the pen, battery cathode to the end cap, the positive on the pen body is positive;(note: please do not turn pen and pencil tail into the battery)

2. Put the pen and pencil body connection installed, open the dust cap, press the control switch one time, observe the interface has a red light, luminous tube on at the same time;(note don't eyes were light interface, so as not to damage the eye)

3. Press the control switch again, observe the light into a pulse mode, the indicator light-emitting tube and out of sync pulse light;(pulse frequency in 2-3 hz or 9 hz)

4. Press the control switch again, light source closed, no light output, at the same time indicator light pipe out;(switch mode to: continuous - pulse - closed - continuous cycle mode)

5. When detecting insert tested optical fiber optical interface, press the control switch at the same time, choose the output light work mode (continuous or pulse);

6. After use, build the dust cap, do not use for a long time, please take out the battery, in order to avoid battery rot, damage the light source.



Maintenance and matters needing attention


1. Laser and harmful, especially to pay attention to protect the eyes, when laser works, avoid to irradiate the eyes with laser directly;
2. In generally, the higher the temperature, the shorter the life of laser, when used to avoid high temperature working environment;

3. The work of laser optical fiber head should be cleaned;

4. When used, the optical interface and the interface needs to detect light and light pull plug;

5. Don't use the light source, would you please put dust cap to avoid dust fall;

6. Should remove the battery when not in using;

7. Please do not remove the end cap and any part of the dust cap, remove shall not be responsible for damage caused.Fiber Checker Fiber Tester Tools Optic Visual Fault Detector network fiber checker fiber optic visual fault detector


Model HCW-325
Central wavelength 650nm±10nm (635nm is available on request)
Emitter type FP-LD
Output power 50MW 
Laser Range ≥50km
Optical connector 2.5mm universal connector, for 1.25mm connectors,                                           FC (Male)-LC. (Female) convertor can be provided on request
Operating mode Both CW and Pulse available
Pulse frequency 2Hz to 3Hz / 9Hz
Power supply 2AA alkaline batteries
Battery LR6 AA alkaline battery
Operating temperature -20°C to 60°C
Storage temperature -40°C to 85°C
Dimension 25 x 195mm
Weight 165g (without battery)



HCW-325  Fiber Testing Tools Visual Fault Detector 50MW Black Leather Sheath 0

Recommended Products
Get in touch with us
Tel : 86-13480892975
Fax : 86-755-23036652
Characters Remaining(20/3000)